1. Home
  2. Vol 4, No 2 (2023)
  3. Kryeziu

Recycled Concrete Aggregates: A Promising and Sustainable Option for the Construction Industry

Driton Kryeziu, Feti Selmani, Armend Mujaj, Igli Kondi

Abstract


The recycling of locally collected concrete waste is being promoted toward reducing the carbon footprint. In the preparation of concrete, recycled concrete aggregates (RCA) are encouraged instead of natural aggregates (NA), as they can help reduce the consumption of virgin materials, the extraction and transportation of which can be costly and environmentally damaging. In this context, we conducted an experimental study on various concrete mixes to evaluate the effect of using RCA instead of NA on the physical and mechanical properties of fresh and hardened concrete. The main novelty of our study lies in meeting one of the principles of circular economy, i.e., reducing the carbon footprint, by recycling concrete waste collected locally. We prepared and investigated test specimens containing 0%, 20%, 40%, and 60% of fine and coarse recycled concrete aggregates. Results for fresh concrete were determined for temperature, consistency, air content, and density, while on the other side, in hardened concrete, results were determined for compressive strength, tensile splitting strength, and density. All results were determined experimentally and then compared. Our results showed that, with the use of RCA in the concrete mix, construction companies can significantly reduce their carbon footprints and help conserve natural resources. RCA can help create a more sustainable and affordable construction industry and is better suited to meet future challenges. Our study can serve as a basis for advancing the application of RCA in the preparation of concrete for sustainable construction.

 

Doi: 10.28991/HEF-2023-04-02-03

Full Text: PDF


Keywords


Concrete; Recycled Concrete Aggregates; Natural Aggregates; Admixtures; Mix Design; EN 206.

References


Eurostat. (2015). Generation of waste excluding major mineral wastes. Eurostat, Luxembourg City, Luxembourg. Available online: https://data.europa.eu/data/datasets/mk1igskoervru59fvpqcw?locale=en, (accessed on February 2023).

International Energy Agency (IEA). (2020). Cement Technology Roadmap 2020. Available online: https://www.iea.org/ (accessed on March 2023).

UNEP. (2022). 2022 Global Status Report for Buildings and Construction. United Nations Environment Programme (UNEP), Nairobi, Kenya. Available online: https://www.unep.org/resources/publication/2022-global-status-report-buildings-and-construction (accessed on March 2023).

Fetting, C. (2020). The European green deal. ESDN report, 53, ESDN Office, Institute for Managing Sustainability, Vienna University of Economics and Business, Vienna, Austria.

International Energy Agency (IEA). (2018). Technology Roadmap – Low-Carbon Transition in the Cement Industry. International Energy Agency (IEA), Paris, France. Available online: https://www.iea.org/reports/technology-roadmap-low-carbon-transition-in-the-cement-industry (accessed on February 2023).

Zhao, Y., Yu, M., Xiang, Y., Kong, F., & Li, L. (2020). A sustainability comparison between green concretes and traditional concrete using an emergy ternary diagram. Journal of Cleaner Production, 256. doi:10.1016/j.jclepro.2020.120421.

EN 197-1:2011. (2011). Cement Part 1: Composition, specifications, and conformity criteria for common cements. European Standard, Brussels, Belgium.

Mohammed, A. H., Mubarak, H. M., Hussein, A. K., Abulghafour, T. Z., & Nassani, D. E. (2022). Punching Shear Characterization of Steel Fiber-Reinforced Concrete Flat Slabs. HighTech and Innovation Journal, 3(4), 483-490. doi:10.28991/HIJ-2022-03-04-08.

EN 1008:2002. (2002). Mixing water for concrete-Specification for sampling, testing, and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. European Standard, Brussels, Belgium.

Kosmatka, S. H., & Wilson, M. L. (2011). Mixing Water for Concrete. Design and Control of Concrete Mixtures (15th Ed.), Portland Cement Association, Skokie, United States.

EN 934-1:2008. (2008). Admixtures for concrete, mortar, and grout — Part 1: Common requirements. European Standard, Brussels, Belgium.

EN 934-2:2009. (2009). Admixtures for concrete, mortar, and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling. European Standard, Brussels, Belgium.

EN 12620:2013. (2013). Aggregates for concrete. European Standard, Brussels, Belgium.

Verian, K. P., Ashraf, W., & Cao, Y. (2018). Properties of recycled concrete aggregate and their influence in new concrete production. Resources, Conservation and Recycling, 133, 30–49. doi:10.1016/j.resconrec.2018.02.005.

Snyder, M. B., Vandenbossche, J. M., Smith, K. D., & Wade, M. (1994). Synthesis on Recycled Concrete Aggregate. Interim Report-Task A. Federal Highway Administration (FHWA), Washington, DC.

Verian, K. P. (2012). Using recycled concrete as coarse aggregate in pavement concrete. Doctoral dissertation, Purdue University, IN, United States.

Verian, K. P., Whiting, N., Olek, J., Jain, J., & Snyder, M. (2013). Using Recycled Concrete as Aggregate in Concrete Pavements to Reduce Materials Cost. doi:10.5703/1288284315220.

Li, X. (2009). Recycling and reuse of waste concrete in China. Resources, Conservation and Recycling, 53(3), 107–112. doi:10.1016/j.resconrec.2008.11.005.

Wen, H., McLean, D. I., & Willoughby, K. (2015). Evaluation of Recycled Concrete as Aggregates in New Concrete Pavements. Transportation Research Record: Journal of the Transportation Research Board, 2508(1), 73–78. doi:10.3141/2508-09.

Yehia, S., & Abdelfatah, A. (2016). Examining the variability of recycled concrete aggregate properties. In Proceedings of the International Conference on Civil, Architecture and Sustainable Development (CASD-2016), London, UK.

Hansen, T. C., & Narud, H. (1983). Strength of recycled concrete made from crushed concrete coarse aggregate. Concrete international, 5(1), 79-83.

R.S. Ravindrarajah, & C.T. Tam (1985). Properties of concrete made with crushed concrete as coarse aggregate. Magazine of Concrete Research 37 (130), 29-38.

Ait Mohamed Amer, A., Ezziane, K., Bougara, A., & Adjoudj, M. (2016). Rheological and mechanical behavior of concrete made with pre-saturated and dried recycled concrete aggregates. Construction and Building Materials, 123, 300–308. doi:10.1016/j.conbuildmat.2016.06.107.

Kurda, R., de Brito, J., & Silvestre, J. D. (2017). Influence of recycled aggregates and high contents of fly ash on concrete fresh properties. Cement and Concrete Composites, 84, 198–213. doi:10.1016/j.cemconcomp.2017.09.009.

Liu, Q., Xiao, J., & Sun, Z. (2011). Experimental study on the failure mechanism of recycled concrete. Cement and Concrete Research, 41(10), 1050–1057. doi:10.1016/j.cemconres.2011.06.007.

Kryeziu, D. R., Muja, A., Kadiu, F., Krelani, V., Sinani, B., & Qafleshi, M. (2018). Green Concrete made with Recycled Concrete Aggregates: Fresh and Hardened Properties. 2018 UBT International Conference. doi:10.33107/ubt-ic.2018.51.

EN 206:2013. (2013). Concrete-Specification, performance, production and conformity. European Standard, Brussels, Belgium.

Benalia, S., Zeghichi, L., & Benghazi, Z. (2022). A Comparative Study of Metakaolin/Slag-Based Geopolymer Mortars Incorporating Natural and Recycled Sands. Civil Engineering Journal, 8(8), 1622-1638. doi:10.28991/CEJ-2022-08-08-07.

Rao, M. C., Bhattacharyya, S. K., & Barai, S. V. (2019). Systematic Approach of Characterisation and Behaviour of Recycled Aggregate Concrete. Springer Transactions in Civil and Environmental Engineering, Springer, Singapore. doi:10.1007/978-981-10-6686-3.

Zega, C. J., Villagrán-Zaccardi, Y. A., & Di Maio, A. A. (2010). Effect of natural coarse aggregate type on the physical and mechanical properties of recycled coarse aggregates. Materials and Structures/Materiaux et Constructions, 43(1–2), 195–202. doi:10.1617/s11527-009-9480-4.

DIN 1045-2;2008-08. (2008). Structures made of concrete, reinforced concrete and prestressed concrete - Part 2: Concrete - Specification, properties, production and conformity - Application rules for DIN EN 206-1, © DIN Deutsches Institut für Normung e. v, Berlin, Germany.

Silva, R. V., De Brito, J., & Dhir, R. K. (2015). The influence of the use of recycled aggregates on the compressive strength of concrete: A review. European Journal of Environmental and Civil Engineering, 19(7), 825–849. doi:10.1080/19648189.2014.974831.

EN 12350-2;2019. (2019). Testing fresh concrete — Part 2: Slump-test. European Standard, Brussels, Belgium.

Mehta, P. K., & Monteiro, P. J. (2006). Proportioning Concrete Mixtures. Concrete Microstructure, Properties, and Materials (3rd Ed.), McGraw-Hill, New York, United States.

EN 12350-7;2019. (2019). Testing fresh concrete — Part 7: Air content — Pressure methods. European Standard, Brussels, Belgium.

EN 12350-6;2019. (2019). Testing fresh concrete — Part 6: Density. European Standard, Brussels, Belgium.

Newman, J. (2003). Strength and failure of concrete under short-term, cyclic and sustained loading. Advanced Concrete Technology, 3–36, Butterworth-Heinemann, Oxford, United Kingdom. doi:10.1016/b978-075065686-3/50253-6.

EN 12390-2:2019. (2019). Testing hardened concrete — Part 2: Making and curing specimens for strength tests. European Standard, Brussels, Belgium.

EN 12390-3;2019. (2019). Testing hardened concrete — Part 3: Compressive strength of test specimens. European Standard, Brussels, Belgium.

EN 12390-6:2019. (2019). Testing hardened concrete ― Part 6: Tensile splitting strength of test specimens. European Standard, Brussels, Belgium.

Bamforth, P., Chisholm, D., Gibbs, J., & Harrison, T. (2008). Properties of concrete for use in Eurocode 2. A Cement and Concrete Industry Publication, The Concrete Center, London, United Kingdom.

EN 12390-7:2019. (2019). Testing hardened concrete — Part 7: Density of hardened concrete. European Standard, Brussels, Belgium.

Nistratov, A. V., Klimenko, N. N., Pustynnikov, I. V., & Vu, L. K. (2022). Thermal Regeneration and Reuse of Carbon and Glass Fibers from Waste Composites. Emerging Science Journal, 6(5), 967-984. doi:10.28991/ESJ-2022-06-05-04.

Matias, D., De Brito, J., Rosa, A., & Pedro, D. (2013). Mechanical properties of concrete produced with recycled coarse aggregates - Influence of the use of superplasticizers. Construction and Building Materials, 44, 101–109. doi:10.1016/j.conbuildmat.2013.03.011.

Rodríguez, D. (2016). Ceramic and mixed construction and demolition wastes (CDW): A technically viable and environmentally friendly source of coarse aggregates for the concrete manufacture. Ph.D. Thesis, Ghent University, Gent, Belgium.


Full Text: PDF

DOI: 10.28991/HEF-2023-04-02-03

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Driton Kryeziu, Feti Selmani, Armend Mujaj, Igli Kondi